¶ Integration Note
| Manufacturer | Innovo |
| Model | Rachio |
| Driver Name | MagicCubeRachioIrrigation |
| Driver Version | 24.10.15.00 |
| Document / Driver Revision | Oct 15, 2024 |
| Core Min / Max Tested | 8.7.601 / 8.8.31 |
¶ Overview
This is a driver that can control your Rachio device via Magic Cube.The driver is capable of controlling on/ off irrigation zones.
¶ Supported Features
THE FOLLOWING OPTIONS ARE SUPPORTED :
- Auto discovery of zones.
- Add irrigation zones.
- Turn on / off zones.
- Open listen socket for faster instead of feedback
- Self-healing connection monitor.
- Fast LAN-based operation – No internet connection is required
- Auto Discovery and Installation of Magic Cube Controller
¶ Supported Devices
- Rachio
¶ Device Configuration
- Install Magic Cube . Setup all your devices in Magic Cube and name them according to your needs. See Device Integration Notes at the end
- The driver relies on a static IP address for each Magic Cube device. Assign a Static IP address using DHCP reservations in your router. If the device IP address changes, then change it manually in the Elan Configurator
- Starting with Magic Cube Aura and V5 Patch 3, you no longer need to add the token. The token is added using the Magic Cube Admin Interface. See Magic Cube User Manual
- Log onto Rachio webapp.
¶ Driver Configuration
¶ Installation Process
- Install the RachioPro driver in the Elan Configurator.
- Irrigation –> Irrigation controllers –> Add new Irrigation Device
- In V2, click Import MagicCubeRachioIrrigation driver. In V1, navigate to the folder where the driver is located and Choose the MagicCubeRachioIrrigation driver, OK
- If you receive a warning that this is not a Native Elan driver, click OK
- The Driver will automatically go into trial mode for 30 days. Wait for about 10 seconds and the Status will turn Green.
- Add the Innovo Activation Code received in the email.
- Starting with Magic Cube Aura and V5 Patch 3, you no longer need to add the token. The token is added using the Magic Cube Admin Interface. See Magic Cube User Manual
- Click Apply
- Click Discover, the driver will discover and populate the IP address of the Magic Cube device on the network. If the device is not discovered or you have more than one, enter the IP address manual. The driver will automatically install all the irrigation zones.
- Click the Install/Reload Devices button, the driver will install all the Zones you have as irrigation zones and also, will create an irrigation group.
¶ Using The Driver
- Open The Viewer.
- Click on Irrigation Section.
- Click On Manual.
- Choose the zone you want to run and click on it.
- Click the arrow to run the zone.
- To stop the running zone click on Stop or Off button.