¶ Integration Note
| Manufacturer: | Netio |
| Model Number(s): |
NETIO 4All NETIO 4 PowerPDU 4C PowerPDU 4PS PowerCable REST 101x PowerBOX 3Px PowerDIN 4PZ |
| Driver Name | Netio |
| Driver Version | 24.06.13.00 |
| g! Core Module Version: | 8.5 Build 18 |
| Driver Developer: | Innovo |
| Document Revision Date: | June 13,2024 |
¶ Overview
This is a two-way driver to turn on / off and query the status of Supported Netio Devices.
¶ Supported Features
THE FOLLOWING OPTIONS ARE SUPPORTED:
This Driver supports the following advanced functions.
On / Off / Short_On / Short_Off / Toggle functions
On / Off / Short_On / Short_Off / feedback and status
Auto Discovery and installation of devices
HTTP communication on user defined port (default 80)
HTTPS communication on user defined port (default 443)
- Event Map Triggers
- Energy / Power / Current / Cost usage information
- Event Maps based on user set parameters for Energy / Power / Current / Cost
¶ Device Configuration
Please setup the Netio device according to manufacturer’s instructions. Using the Netio web interface Under the M2M API Protocols tab:
- Check to enable the JSON API
- Enable READ-WRITE and remember the password.
- Enter Username and Password for API access. This is the U/P that will be used in the configurator
- It is recommended that the HTTPS protocol is enabled for safe and secure communication.
- Under Settingsà Security Settings, Check Turn on secure connections
- Specify the port number if different from default (443). This is the port that will be used in the configurator
¶ Driver Configuration
IMPORTANT NOTE: Unzip the Netio.edrvc to your driver folder first before installation.
¶ Installation Process
The entire tutorial video set is available as a playlist https://www.youtube.com/playlist?list=PLfCDlA-HjmLDcxxOX7nVMC3ZsrJa1W79D
- How to setup Netio on Elan using the configurator Part 1, Installing the Driver https://youtu.be/djue0k_i640
- How to setup Netio on Elan using the configurator Part 2, Connecting Display Elements and Event Maps https://youtu.be/8-lC4K2N0P8
¶ Configuration Details
The following table provides settings used in Configurator …Please refer to the Configurator Reference Guide for more details.
In the table below:
- “<User Defined>”, etc. Type in the desired name for the item.
- “<Auto Detect>”, etc. The system will auto detect this variable.
o
| Devices | Variable Name | Settings | Comments |
| Lighting + Input | Name | User Defined (Default: Netio) | |
| System # | <Auto Detect> | ||
| Device Type | Ethernet | ||
| Driver Name | Netio | ||
| Driver Version | <Auto Detect> | ||
| Driver Vendor | Innovo | ||
| Activation KEY | <User Defined> | ||
| IP Address / Port | <User Defined> | 80 for HTTP / 443 for HTTPS | |
| Username / Password | <User Defined> | ||
| Connection Method | HTTP or HTTPS | ||
| Polling Time | <User Defined> |