¶ Integration Note
|
Manufacturer |
Emerson |
|
Model |
ST75, ST75S, ST55 |
|
Driver Name |
Sensi |
|
Driver Version |
25.02.01.00 |
|
Document / Driver Revision |
Feb 1,2025 |
|
Core Min / Max Tested |
Min 8.8.xx |
¶ REFRESH TOKENS:
Sensi recently updated its apps (8.6.3) and end point to force reCaptcha based authentication. This currently cannot be replicated so instead of username/password, one is required to navigate to https://manager.sensicomfort.com/ in a browser and copy-n-paste the refresh_token.
- Open Chrome or Edge browser
- Go to https://manager.sensicomfort.com/
- Press F12 to open DevTools and then switch to the Network tab (Or open Dev Tools from the Settings Menu)
- Enter your credentials to log in. You don’t need to go any further or subscribe.
- Switch back to DevTools and Go the Network Tab.
- On the left side find the line that says token?device…., then choose the response tab and copy the refresh_token value (without quotes) from the Response of the token?device= request.
Note: You might see two requests, and the first one might not have a Response.
- Split the token into three separate tokens by sepearted by the periods “.” And Enter those in the driver without the periods or additional spaces
- Example
The long Refresh token is:
eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJjbGllbnRfaWQiOiJmbGVldCIsInVzZXJfaWQiOiJkZXZAaW5ub3ZvLm5ldCIsImRldmljZSI6IkZMMzNULWRldi02MTkwMzM0MzY4Iiwic2FsZXNmb3JjZV9pZCI6IjAwMTNiMDAwMDF1cm54OUFBQSIsImZsZWV0X2VuYWJsZWQiOmZhbHNlLCJpYXQiOjE3MzgyNjc0MTYsImV4cCI6MjA1Mzg0MzQxNn0.AcGN1bndX8tjlJqGf-kplve-tBnYF8_xLjEOKrN3Ub8
Split and Enter like this:
token 1:
eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9
token 2: eyJjbGllbnRfaWQiOiJmbGVldCIsInVzZXJfaWQiOiJkZXZAaW5ub3ZvLm5ldCIsImRldmljZSI6IkZMMzNULWRldi02MTkwMzM0MzY4Iiwic2FsZXNmb3JjZV9pZCI6IjAwMTNiMDAwMDF1cm54OUFBQSIsImZsZWV0X2VuYWJsZWQiOmZhbHNlLCJpYXQiOjE3MzgyNjc0MTYsImV4cCI6MjA1Mzg0MzQxNn0
token 3:
AcGN1bndX8tjlJqGf-kplve-tBnYF8_xLjEOKrN3Ub8
¶ Overview
This is a two-way driver to control and get feedback from the Emerson Sensi Wi-Fi enabled thermostats.
The Elan controller is capable of controlling, querying and providing feedback for multiple Sensi units.
¶ Supported Features
The following options are supported :
This Driver supports
The following playback options are not supported by [this driver]:
The driver does not support humidification and dehumidification
Any feature not specifically noted as supported should be assumed to be unsupported.
¶ Device Configuration
¶ Driver Configuration
¶ Installation Process
¶ Using the Driver
