¶ Integration Note
| Manufacturer: | Symetrix |
|---|---|
| Model Number(s): | Jupiter 12/8 / Prism 8 |
| Driver Name | Symetrix Jupiter 12/8 / Prism 8 |
| Driver Version | 24.07.22.00 |
| Core Module Version: | 8.7 |
| Driver Developer: | Innovo |
| Document Revision Date: | July 22, 24 |
¶ Overview
¶ Supported Features
This is a two-way driver to control the Symetrix Jupiter 12/8 Audio Mixer.
The Elan controller is capable of controlling and syncing the controls of the Jupiter 12/8.
THE FOLLOWING OPTIONS ARE SUPPORTED BY [THIS DRIVER]:
- This Driver supports
- Read and sync controls from Jupiter 12/8
- Control 4 Zones (Submixes) and 4 Sources
- Control the System Function of the J12/8
- Read / Sync Input Mute & Lock
- Read / Sync Input Priority Levels
- Read / Sync Submix Sliders with immediate feedback levels
- Read / Sync Output mute and levels
THE FOLLOWING OPTIONS are not supported by [this driver]:
¶ The Driver supports the following Jupiter 12/8 templates
- Gain-Sharing AutoMixer #1
- Gain-Sharing AutoMixer #3
- Gating AutoMixer #1
- Gating AutoMixer #3
¶ Driver Configuration
¶ Installation Process
IMPORTANT NOTE:
- Setup the Jupiter 12/8 with the desired supported template the proceed with the configuration
- Not all controls are mapped to Elan, only the user essential controls and available.
- The Entire Installation video can be seen here: https://www.youtube.com/playlist?list=PLfCDlA-HjmLDonbxgwUPQlcL2vhPIjNLe
- For install please refer to this video: https://youtu.be/TCJOw_rkayM
- For Setup and Usage Please refer to this video https://youtu.be/Vu5EyaQuzQs
- To Change Templates, first change the templates settings in the Jupiter 12/8 then in the configurator change the Template to match. Wait up to 2 minutes for the driver to sync the controls.
¶ Using the Driver
Please use the following screen as a guide to the control mapping.
g! CONFIGURATION DETAILS
The following table provides settings used in Configurator …Please refer to the Configurator Reference Guide for more details.
In the table below:
- “<User Defined>”, etc. Type in the desired name for the item.
- “<Auto Detect>”, etc. The system will auto detect this variable.
| Devices | Variable Name | Settings | Comments |
| Zone Controller | Name | User Defined (Default: Volumio) | |
| System # | <Auto Detect> | ||
| Device Type | Ethernet | ||
| Driver Name | Symetrix Jupiter 12/8 | ||
| Driver Version | <Auto Detect> | ||
| Driver Vendor | Innovo | ||
| Activation KEY | <User Defined> | ||
| IP Address | <User Defined> | ||
| Display Name | Symetrix Jupiter 12/8 | ||
| System # | <Auto Detect> | ||
| Source Device | <User Defined> (Default: Volumio) |
¶ Troubleshooting
- Contorls Didn’t Sync. Please wait two minutes after install for the driver to update