Innovo Wiki

Innovo Wiki

Loading the knowledge...

Lea Using The Driver

Estimated reading: 1 minute
  • From the Viewer, selecting a source will automatically turn the output on.  Choosing Off for the zone will set the Zone to off in Elan but doesn’t power the Amp off.
  • Click on the settings for each zone to change the EQ levels.

Note the EQ will only change the GAIN value for the EQ type setup in the Web Interface.  All Freqeuncies, EQ type and Q levels have to be setup using the GUI.  This gives the user the flexibility to change the EQ type without affecting the driver.