Innovo Wiki

Innovo Wiki

Loading the knowledge...

Media Driver Configuration

Estimated reading: 2 minutes
  • The Driver uses a static IP address. Please assign a static IP address or using DHCP Static Reservation from your Router to guarantee that the ATV Device will always have the same IP Address.

This is a new driver with a new name.  You cannot upgrade an existing ATVOS driver.

  • Open Media, Communication Devices, Add New Communication Device
  • In V2, click Import and choose MagicCubeMediaPro Driver, In V1 Navigate to the folder where the driver is located and choose the MagicCubeMediaPro, then click OK.
  • If you receive a warning that this is not a Native Elan driver, click OK
  • The Driver will automatically go into trial mode for 30 days. Wait for about 10 seconds and the Status will turn Green.
  • Add the Innovo Activation Code received in the email.
  • Starting with Magic Cube Aura and V5 Patch 3, you no longer need to add the token.  The token is added using the Magic Cube Admin Interface.  See Magic Cube User Manual
  • Click Apply
  • Click Discover, the driver will discover and populate the IP address of the Magic Cube device on the network.  If the device is not discovered or you have more than one, enter the IP address manual.
  • From the Platform dropdown, choose the brand of TV you would like to install. 
  • NOTE: You must have the brand/platform preconfigured in the Magic Cube First.  See Magic Cube Manual.
  • NOTE: If the platform you want to install is not shown on the dropdown, contact to get the exact name of the platform you want. After you get the exact name, go and choose Other from the platform dropdown, enter the name that you have in the Other Platform Field, click Apply, and install.
  • NOTE: To continue installing platforms from the dropdown you should have the Other Platform field empty.
  • Click Install Devices.  The Driver will automatically discover all the TVs connected to the Magic Cube and install them under Sources as sub-drivers based on manufacturer.

NOTE: Once the driver Discovers and installs the sub-drivers, it will automatically fill the Remote entity, Media Player entity, or both.